MTZ-50: the 55 hp Belarus row-crop tractor

MTZ

MTZ-50 in the Tractor History Museum in Cheboksary
MTZ-50 in the Tractor History Museum in Cheboksary. Photo by Александр Сигачёв, CC0 via Wikimedia Commons.

The MTZ-50 was the universal row-crop tractor that Minsk Tractor Works built from 1962 to 1985. A 55 hp D-50 diesel, a nine-speed gearbox and a hydraulic steering system made it a common sight on Soviet farms, and a four-wheel-drive version, the MTZ-52, was developed from it.

MTZ-50 at a glance

MTZ-50 key facts
Maker Minsk Tractor Works, Minsk
Production 1962–1985
Class 1.4 t universal row-crop tractor
Engine D-50 and D-50L, four-cylinder diesel, 41 kW (55 hp)
Engine layout four-stroke, water-cooled, swirl chamber
Overhaul interval 5,000 engine hours
Gearbox nine forward and two reverse speeds
Speed range 1.65–25.5 km/h
Ground clearance 465 mm
Track, rear 1,400–2,100 mm, stepless
Track, front 1,200–1,800 mm, in 100 mm steps
Four-wheel drive MTZ-52

The MTZ-50 has no English-language Wikipedia article of its own; this page is based on the Russian article about the MTZ-50 and on the English article about the Minsk Tractor Works.

History of the MTZ-50

The MTZ-50 grew out of the drive to bring the virgin lands of Kazakhstan, the Volga region, the Urals and the Far East into agricultural use in the early 1950s, which left the country short of reliable and unpretentious tractors. In the spring of 1958 the experimental shop of the Minsk Tractor Works presented several prototypes to the scientific and technical council of Soyuzselkhoztekhnika. The design was approved as a 1.4-tonne universal wheeled tractor with a naturally aspirated inline diesel of at least 55 hp; in 1959 state tests were completed, the machine was refined and the drawings were handed to production. Series building began in 1962 and lasted until 1985.

MTZ-50 of 1968 in a Polish agricultural museum
MTZ-50 of 1968 at an agricultural museum in Poland. Photo by Adikpl, CC BY-SA 4.0 via Wikimedia Commons.

The tractor used the traditional MTZ layout: a semi-frame of two channels joined by a cast front beam, the engine on hinged supports under an alligator-type bonnet that opened forward, large driving wheels behind and small steered wheels in front. The separate-aggregate hydraulic system kept its oil tank and the hydraulic units, the distributor and the draft-control booster, on the clutch housing, with an NSH-32 gear pump driven from the engine and a three-section spool valve. The rear track could be set steplessly between 1,400 and 2,100 mm and the front track in 100 mm steps between 1,200 and 1,800 mm; ground clearance was 465 mm.

Two diesels were offered. The D-50 was started by an electric starter and the D-50L by a two-stroke petrol starting engine; both were four-cylinder, four-stroke, water-cooled units with swirl chambers, rated at 41 kW (55 hp) and designed to run 5,000 engine hours before a major overhaul. Behind the dry single-plate clutch sat a nine-speed gearbox with two reverse speeds, giving a range from 1.65 to 25.5 km/h, and a rear axle with a pedal-operated differential lock. The rear wheels were rigidly suspended, the front axle was semi-rigid on a balance beam, the brakes were of disc type and the steering was hydraulically assisted.

MTZ-52: the four-wheel-drive version

The high-clearance modification with two driving axles was developed on the MTZ-50 base and named MTZ-52. It used the same D-50 and D-50L engines as the family, and the model list included the MTZ-50L, the MTZ-50X and the MTZ-52L alongside the two basic tractors. The electrical equipment of the family consisted of a generator, an electric starter, a 12 V starter for the starting engine and SND-100-B3 glow plugs rated at 50 A.

Design and features

  • Nine speeds: nine forward and two reverse gears covered 1.65 to 25.5 km/h.
  • Hydraulic steering: the steered front wheels were power-assisted.
  • Adjustable track: the rear track moved steplessly between 1,400 and 2,100 mm, the front track in 100 mm steps.
  • Separate hydraulics: an NSH-32 pump fed a three-section spool distributor and the rear linkage.
  • Long service interval: the engine was designed for 5,000 engine hours before a major overhaul.

MTZ-50 versions

  • MTZ-50: the base model with the D-50 diesel and electric starting.
  • MTZ-50L: D-50L engine with a two-stroke petrol starting engine.
  • MTZ-50X: a further version listed with the 50L in the family.
  • MTZ-52: four-wheel-drive version with two driving axles.
  • MTZ-52L: the four-wheel-drive version with the D-50L engine.

The MTZ-50 was one of a line of Belarus tractors; earlier machines are in the article on the MTZ-5 and MTZ-7, later ones in the article on the MTZ-80 and MTZ-82. More are in the MTZ collection.

Video: Start up of Belarus MTZ 50 tractor

Video by hendrikhanso on YouTube.

Sources