The Moto Morini 500 is the larger V-twin that joined the 350 Sport and Strada in 1977. It used the same 72-degree layout that Franco Lambertini had designed for the 3½, and it was sold in the same two forms, a Sport and a Strada.
Moto Morini 500 at a glance
| Made by | Moto Morini, Bologna, Italy |
|---|---|
| Introduced | 1977 |
| Versions | Sport and Strada |
| Smaller sister | the 350, with 344 cc, on sale since 1973 |
| Engine layout | air-cooled 72-degree V-twin, pushrods and rockers |
| Heads | flat Heron heads, combustion chamber in the piston crown |
| Camshaft drive | toothed belt |
| Ignition | capacitor discharge, designed by Ducati Elettronica |
| Carburettors | Dell’Orto VHB square-slide on the 350 of the same family |
| Frame | steel double cradle |
| Also on this page | the record filed as the 501, the same engine family |
There is no Wikipedia article on the 500 itself; this page is based on the section on the 350 and 500 V-twins in the English article on the firm, so it is shorter than the article on the 3½.
History of the Moto Morini 500
The V-twin family
Morini launched its first 72-degree V-twins in 1973. The 350 Sport and Strada displaced 344 cc and were complemented in 1977 by 500 cc Sport and Strada models. At the time of its release the 3½ cost about as much as a Honda CB750, and the equipment on the whole family was of a high specification.
The engine
The engine was designed by Franco Lambertini and built with Franco and Gino Marchesini. It had Heron heads, milled flat, with the combustion chamber recessed into the piston crown, which helped combustion and gave excellent fuel economy: a test by Motorcycling Monthly at the Motor Industry Research Association in Britain in 1976 returned 65 miles per imperial gallon with a rider and a pillion passenger aboard. Inside there was a one-piece forged steel crankshaft, ball main bearings on the first series and plain big-end bearings on the second, the connecting rods ran on a common pin and the cylinders were offset from one another by 50 mm. Front and rear barrels and heads were interchangeable, the carburettors were Dell’Orto VHB 25 BS square-slide items on the 350, and the camshaft was driven by a small toothed belt, a revolutionary advance at the time. Ignition was a capacitor-discharge system designed by Ducati Elettronica.
Owners and spares
The Morini V-twins kept a loyal following long after production ended. Spare parts are still available from specialist firms, and the former editor of Classic Bike magazine, Hugo Wilson, has owned a 3½ Sport since 1982 and was still using it as a regular commuter in 2010.
Design and features
- The 500 version: the same engine family as the 350, enlarged and offered as a Sport and a Strada from 1977.
- Heron heads: flat heads with the combustion chamber in the piston, which gave both good combustion and low consumption.
- Belt-driven camshaft: a toothed belt instead of gears or a chain, a first for a production motorcycle.
- Interchangeable parts: front and rear barrels and heads could be swapped, which made the family easy to service.
Moto Morini 500 versions
- 500 Sport (1977): the sporting version of the big V-twin.
- 500 Strada (1977): the touring version.
- 350 Sport and Strada: the 344 cc models that came first, in 1973.
- 501: the record under that name belongs to the same 500 cc engine family and is collected on this page.
The 350 version has its own article, the Moto Morini 3½, and the same engine was used in the Dart. The off-road member of the family was the Camel; more models are in the Moto Morini collection.
Video: Albino su Moto Morini 500 great italian sound!
Video on YouTube.
Sources
- Moto Morini, English Wikipedia: the 1977 500 models and the engine description