ACMA Vespa: the Italian scooter with a French name

ACMA

ACMA Vespa: the Italian scooter with a French name

The Vespa was created in 1946 by Piaggio at Pontedera as simple, affordable transport for a country rebuilding after the war. The machine in the video is a 1955 Vespa Acma: ACMA — Ateliers de construction de motocycles et d’automobiles — is the French company whose name this scooter carries.

ACMA Vespa at a glance

Vespa key facts
Maker Piaggio & Co. S.p.A., Pontedera, Italy
French name ACMA, Ateliers de construction de motocycles et d’automobiles
Example shown 1955 Vespa Acma
Designer Corradino D’Ascanio
Prototype MP6, after the MP5 “Paperino” of 1944
Patent filed 23 April 1946 in Florence, approved that December
Engine 98 cc two-stroke, fan-cooled
Transmission three-speed, twistgrip gear change through rods
Frame unit spar frame with stress-bearing steel panels
Wheels 8-inch, interchangeable, on stub axles
Front suspension single-sided
Rear suspension rigid

The English Wikipedia article on Vespa is the only usable source here; the French page ACMA is a disambiguation entry giving only the name Ateliers de construction de motocycles et d’automobiles. The article therefore describes the 1946 Vespa scooter itself, as carried by the 1955 ACMA example in the video. Based on one source.

History of the ACMA Vespa

An aircraft factory turns to scooters

After the Second World War Italy’s aircraft industry was severely restricted by the peace terms, and Piaggio’s bomber plant at Pontedera had been destroyed by bombing. The country’s economy was crippled and its roads were in a disastrous state, so Enrico Piaggio, son of the founder Rinaldo Piaggio, left aviation behind and set out to give Italians a modern and affordable means of transport.

Paperino and the MP6

In 1944 Piaggio engineers Renzo Spolti and Vittorio Casini designed the MP5, officially Moto Piaggio no. 5 and nicknamed “Paperino” (Donald Duck). It had bodywork fully enclosing the drivetrain, a tall front splash guard, handlebar-mounted controls, forced-air cooling and small wheels, but Enrico Piaggio disliked its tall central section that the rider had to straddle. He turned to the aeronautical engineer Corradino D’Ascanio, who hated motorcycles as bulky, dirty and unreliable. D’Ascanio’s MP6 put the engine beside the rear wheel and drove the wheel directly from the transmission, eliminating the chain and its oil and dirt. The unit spar frame used the steel outer panels as stressed members, which allowed a step-through design instead of the high centre of the Paperino. The MP6 also had single-sided front suspension, interchangeable front and rear wheels on stub axles, and a spare wheel.

The name

Seeing the MP6 for the first time, Enrico Piaggio is said to have exclaimed “Sembra una vespa!” — “It looks like a wasp!” The name stuck: the thicker rear and narrow waist resembled the insect, and the steering rod its antennae.

The 1946 patent and the first machines

On 23 April 1946 Piaggio took out a patent in Florence for a motorcycle with a frame combining mudguards and a casing that covered the whole mechanical part; it was approved the following December. The first 13 examples appeared in the spring of 1946, and their aircraft origins were plain to see in the attention to aerodynamics.

What the rider got

The production scooter had a painted pressed-steel body that combined a cowling around the engine, a flat floor panel for the feet and a front fairing against wind and rain. The front shield was at first a flat piece of sheet metal; later it became a twin skin with storage space behind it, like a car’s glovebox. The fuel cap sat under the hinged seat, saving the cost of a separate lock. There was a pillion seat for a passenger or, as an option, a storage compartment. The horizontally mounted 98 cc two-stroke engine drove the rear wheel through a three-speed transmission, the gear change worked by a twistgrip through a system of rods, and a fan on the magneto flywheel pushed air over the cooling fins — the method still used on Vespas today.

Design and features

  • Pressed-steel body: one painted shell around the engine, with a flat floor and a front fairing.
  • Step-through frame: no high centre section to climb over, unlike the MP5 Paperino.
  • Engine beside the rear wheel: direct drive without a chain, so no oily chain to adjust.
  • Small 8-inch wheels: compact package with room for the rider’s legs.
  • Forced-air cooling: a fan on the magneto flywheel blows air over the cylinder fins.

ACMA Vespa versions

  • MP5 “Paperino” (1944): the first Piaggio scooter prototype, with a tall central section.
  • MP6 prototype: D’Ascanio’s step-through design that became the production Vespa.
  • 1946 production scooter: 98 cc two-stroke, three speeds, pressed-steel body.
  • Early flat-shield cars: a single-skin front shield before the twin-skin version with storage.
  • Twin-skin shield: later bodywork with a glovebox behind the front shield.

More scooters and motorcycles of the marque are in the ACMA collection. If you are looking at an older machine, check the frame number with our guide How to read a VIN.

Video: Vespa Acma 1955

Video on YouTube.

Sources