Motobi Tornado: the 650 cc twin from Pesaro

MOTOBI

Benelli Tornado 650 S of 1972
Tornado 650 S of 1972, the version with electric starter. Photo by El Caganer, CC BY 2.0 via Wikimedia Commons.

The Tornado was the 650 cc parallel twin that Benelli designed in the 1960s to win a share of the American market from the British twins. Sold in Italy and abroad under both the Benelli and the Motobi names, it went into production in 1970 and lasted until 1975, by which time the Japanese four-cylinder machines had changed the market it was built for.

Motobi Tornado at a glance

Motobi Tornado key facts
Maker Benelli, Pesaro, sold also as a Motobi
Production 1970–1975
Engine 649 cc parallel twin, four-stroke, air-cooled
Bore × stroke 84 × 58 mm (oversquare)
Carburation twin 29 mm Dell’Orto VHB
Gearbox five-speed, chain final drive
Front suspension 38 mm Marzocchi forks
Rear suspension swinging arm, twin Ceriani shock absorbers
Brakes Grimeca drums, 230 mm front and 200 mm rear
Built about 3,000, half of them sold in Italy

The Tornado was a Benelli design sold also under the Motobi name; the English and Italian Wikipedia articles on the Benelli 650 Tornado are the sources for this page, so the text is based on two sources.

History of the Motobi Tornado

Why Benelli built a 650

After the Second World War Benelli made only 250 cc machines and smaller, and by the mid-1960s the company wanted a bigger model for the United States, where British twins dominated. The first idea was a 350 cc twin, entrusted to Piero Prampolini, the engineer known for Motobi’s egg-shaped singles, but the project grew into a 650 to meet the British twins — and the new 500 to 700 cc designs then being prepared by Laverda, Moto Guzzi and Gilera.

The engine was complex enough to require new machinery, and financial limits and disagreements between the Benelli brothers delayed the production line. A first prototype was shown at the 1967 Milan show; development continued with Renzo Pasolini and with the American actor Steve McQueen, then the face of Benelli in the United States, who asked for a Metisse-type frame. Luigi Benelli, who had never designed a frame for so heavy and powerful a machine, drew one, and a second prototype appeared at the 1969 Milan fair. Production began in 1970.

Benelli 650 S at Motodays 2017
A 650 S preserved in original condition. Photo by Nicholas Gemini, CC BY-SA 4.0 via Wikimedia Commons.

Tornado, 650 S and 650 S2

The first production bikes went to the United States in 1970 and reached Europe in early 1971, by which time the model was called the Tornado and had a freer exhaust and the larger 29 mm Dell’Orto carburettors. Low-speed handling was criticised and blamed on the engine sitting too high in the frame. After Alejandro de Tomaso took over Benelli in 1972 came the 650 S, with an electric starter, a rebalanced crankshaft, higher compression, revised gear ratios, Veglia instruments and rubber-mounted components to fight vibration. The 1973 650 S2 had a higher compression ratio for more low-down torque, more rubber mounting, a humped seat and a small handlebar fairing.

To prove the machine’s reliability the Milan dealer Lombromotori had an S2 ridden around Italy for 25 hours by a team of 18 celebrity riders, among them Tarquinio Provini, Gigi Villoresi and Walter Villa; the run covered 2,612 km. The Tornado was built at Pesaro and sold through the Motobi network as well, which is why the same motorcycle carried two badges. The Italian article on the model records that it outsold its British rivals in Italy, but the arrival of the Honda CB750 and the Kawasaki H1 had already moved the market on. Production ended in 1975.

Design and features

  • Racing-derived engine: horizontally split crankcases, o-rings instead of gaskets, four main bearings and a flywheel between the centre bearings.
  • Oversquare dimensions: 84 × 58 mm allowed large valves of 38 mm inlet and 35 mm exhaust.
  • Reversed rotation: Prampolini turned the engine round so that the hottest part of the cylinder faced the cooling airflow.
  • Two badges: the same machine was sold as a Benelli and as a Motobi.

Motobi Tornado versions

  • Tornado (1970–1971): the original model, single 30 mm carburettor on the prototype, twin 29 mm VHB on production bikes.
  • 650 S (1972): electric starter, rebalanced crankshaft, higher compression and rubber mounting.
  • 650 S2 (1973): higher compression, more low-end torque, humped seat and handlebar fairing.
  • US and European specification: differences in handlebars and seat.

The Tornado was the largest machine to wear the Motobi badge; the smaller mopeds from the same factory are described in the Motorella article. More models are in the Motobi collection.

Sources