ATK 250: the small two-stroke in the ATK range

ATK

ATK 250: the small two-stroke in the ATK range

The ATK 250 was the 250 cc two-stroke counterpart to the 406, the air-cooled Rotax-powered model that became synonymous with ATK’s two-stroke line. It appeared in 1988 and stayed in the range in various forms, gaining a liquid-cooled version in 1996.

ATK 250 at a glance

ATK 250 key facts
Maker ATK Motorcycles, Centerville, Utah, USA
Type off-road motorcycle
Engine 250 cc two-stroke Rotax
Introduced 1988, as the 250 cc counterpart of the 406
Cooling air-cooled at first, liquid-cooled 250 line from 1996
Frame ATK steel frame
Rear brake disc mounted on the countershaft
Rear suspension single shock, side-mounted, no linkage
Fuel filler offset
Air filter beneath the fuel tank
Brake pedal backward-facing

Based on one source, the English Wikipedia article on ATK Motorcycles. There is no separate page on the ATK 250; this article covers what that page says about the model.

History of the ATK 250

Origins

ATK was founded in 1985 by Horst Leitner, an Austrian-born engineer and former Grand Prix motocross racer, in Centerville, Utah. In 1987 Can-Am approached ATK about building a replacement for its off-road line using existing 250 cc and 400 cc two-stroke Rotax engines. From that work ATK created the 250 and 406 models. Can-Am cancelled the deal, but an agreement with North American Can-Am dealers funded production of the 406 and the models that followed, and from 1989 until 1995 ATK was the fifth largest off-road motorcycle manufacturer in North America.

Design

The ATK 250 carried the chassis ideas that set the firm apart, among them a rear disc brake mounted on the countershaft, a single rear shock mounted at the side with no linkage, a fuel tank filler offset to one side, an air filter beneath the fuel tank and a backward-facing brake pedal. The two-stroke line was the first ATK range to receive a second bike, the 250 cc counterpart of the 406.

Later years

A liquid-cooled 250 line joined the range in 1996, together with a 260, at the same time as ATK retired its open-class two-stroke with a Limited Edition 406. In 2003 the company was still listing the 250 and 260 Enduros alongside the four-stroke 605 and 500 Enduro, the 50MX, a two-stroke 125 and a 600 Police Edition. By then ATK had moved on to badge-engineered models acquired from other makers, and after 2016 it operated mainly to supply parts and service manuals for machines already sold.

Design and features

  • Rotax two-stroke engine: the 250 cc unit shared the two-stroke line with the 406.
  • Countershaft rear brake: the disc sat on the countershaft rather than the rear wheel.
  • Linkless side-mounted shock: a simplified rear suspension layout without a linkage.
  • Enduro variants: a liquid-cooled 250 and a 260 Enduro continued the line into the 2000s.

ATK 250 versions

  • 250 (from 1988): the original 250 cc two-stroke counterpart of the 406.
  • Liquid-cooled 250 (from 1996): the updated water-cooled line.
  • 260 Enduro (from 1996): the larger two-stroke offered alongside the 250.
  • 250 Enduro (2003): the enduro version listed in the 2003 range.

The bigger off-road models are covered in the ATK 450 and ATK 605 articles. More machines are in the ATK collection.

Sources